Reported to Senate November 16, 2026
[Congressional Bills 119th Congress] [From the U.S. Government Publishing Office] [S. 1682 Reported in Senate (RS)]
<DOC>
Calendar No. 716 119th CONGRESS 2d Session S. 1682
[Report No. 119-161]
To direct the Consumer Product Safety Commission to promulgate a consumer product safety standard for certain gates, and for other purposes.
_______________________________________________________________________
IN THE SENATE OF THE UNITED STATES
May 8, 2025
Mr. Curtis (for himself and Ms. Klobuchar) introduced the following bill; which was read twice and referred to the Committee on Commerce, Science, and Transportation
November 16, 2026
Reported by Mr. Cruz, with an amendment [Strike out all after the enacting clause and insert the part printed in italic]
_______________________________________________________________________
A BILL
To direct the Consumer Product Safety Commission to promulgate a consumer product safety standard for certain gates, and for other purposes.
Be it enacted by the Senate and House of Representatives of the United States of America in Congress assembled,
<DELETED>SECTION 1. SHORT TITLE.</DELETED>
<DELETED> This Act may be cited as the “Alex Gate Safety Act of 2025”.</DELETED>
<DELETED>SEC. 2. CONSUMER PRODUCT SAFETY STANDARD FOR COVERED GATES.</DELETED>
<DELETED> (a) Standard Required.—</DELETED> <DELETED> (1) In general.—Not later than 1 year after the date of the enactment of this Act, the Commission shall promulgate, in accordance with section 553 of title 5, United States Code, a final consumer product safety standard for covered gates that includes the requirements described in paragraph (2).</DELETED> <DELETED> (2) Requirements described.—The requirements described in this paragraph for a covered gate are the following:</DELETED> <DELETED> (A) The covered gate meets the safety- related standards of ASTM F900-25, ASTM F1184-23e1, or ASTM F2200-24, as applicable to the relevant category of covered gate as of January 1, 2025, or any successor standard.</DELETED> <DELETED> (B) If the covered gate has an operator or similar system, the gate meets the safety-related standards of ANSI/CAN/UL 325 as of January 1, 2025, or any successor standard.</DELETED> <DELETED> (b) CPSC Determination of Scope.—In promulgating a consumer product safety standard under subsection (a), the Commission shall determine the types of covered gates that are subject to the standard and ensure that such covered gates are within the jurisdiction of the Commission.</DELETED> <DELETED> (c) Revision of Voluntary Standards.—</DELETED> <DELETED> (1) Notice to the commission.—If an organization revises a voluntary standard that has been adopted, in whole or in part, as a consumer product safety standard under this section, the organization shall notify the Commission of the revision.</DELETED> <DELETED> (2) Treatment of revision.—The revised voluntary standard shall be considered to be adopted by the Commission, effective on the date that is 180 days after the date on which the organization notifies the Commission of the revision (or such later date specified by the Commission in the Federal Register) unless, not later than 90 days after the date on which the organization notifies the Commission of the revision, the Commission notifies the organization that the Commission has determined that the revision does not improve the safety of the covered gates to which the standard applies and that the Commission is retaining the existing consumer product safety standard. Not later than 90 days before the date on which a revised voluntary standard is considered to be adopted by the Commission under this subsection, the Commission shall publish in the Federal Register notice that such revised voluntary standard will be considered to be so adopted on such date.</DELETED> <DELETED> (d) Future Rulemaking.—At any time after the promulgation of a consumer product safety standard under subsection (a), the Commission may initiate a rulemaking, in accordance with section 553 of title 5, United States Code, to modify such standard, if the Commission determines that a modification would further reduce the risk of injury associated with covered gates.</DELETED> <DELETED> (e) Treatment of Standards.—Any consumer product safety standard promulgated under subsection (a) (including any modification of such standard under subsection (c)) or revised voluntary standard considered to be adopted by the Commission under subsection (c) shall be treated as a consumer product safety rule promulgated under section 9 of the Consumer Product Safety Act (15 U.S.C. 2058).</DELETED>
<DELETED>SEC. 3. EDUCATION AND AWARENESS CAMPAIGN.</DELETED>
<DELETED> (a) In General.—Not later than 2 years after the date of the enactment of this Act, the Commission shall undertake a national campaign to promote awareness and educate the public about the dangers associated with covered gates, including the dangers of detached or falling covered gates, and methods (including low-cost methods) to prevent covered gates from causing death or injury, including safety standards relating to covered gates and best practices for design, installation, inspection, maintenance, and improvement of covered gates.</DELETED> <DELETED> (b) Requirements.—In carrying out the campaign required by subsection (a), the Commission shall employ, at a minimum, the following:</DELETED> <DELETED> (1) Educational materials designed for covered gate manufacturers, contractors, retailers, and service companies.</DELETED> <DELETED> (2) Educational materials designed for consumers, owners, and operators of covered gates.</DELETED> <DELETED> (3) Educational materials designed for building officials and local educational agencies to support the updating and enforcement of building codes for new and existing buildings with respect to the safety of covered gates.</DELETED> <DELETED> (c) Report to Congress.—Not later than 3 years after the date of the enactment of this Act, the Commission shall submit to Congress a report that contains a summary of actions taken by the Commission in the campaign required by subsection (a).</DELETED>
<DELETED>SEC. 4. DEFINITIONS.</DELETED>
<DELETED> In this Act:</DELETED> <DELETED> (1) Building official.—The term “building official” means any State, Tribal, territorial, or local official who is responsible for proposing modifications to building codes, participating in adopting building codes, interpreting building code requirements, overseeing building code enforcement activities, or otherwise administering building codes.</DELETED> <DELETED> (2) Commission.—The term “Commission” means the Consumer Product Safety Commission.</DELETED> <DELETED> (3) Covered gate.—The term “covered gate” means—</DELETED> <DELETED> (A) an automatic vehicular gate;</DELETED> <DELETED> (B) a manual vehicular gate; and</DELETED> <DELETED> (C) any other gate that is more than 48 inches wide or 84 inches or greater in height.</DELETED> <DELETED> (4) Local educational agency.—The term “local educational agency” has the meaning given such term in section 8101 of the Elementary and Secondary Education Act of 1965 (20 U.S.C. 7801).</DELETED> <DELETED> (5) Manufacturer.—The term “manufacturer” has the meaning given such term in section 3(a) of the Consumer Product Safety Act (15 U.S.C. 2052(a)).</DELETED> <DELETED> (6) Positive stops.—The term “positive stops” means an immovable component that, by the placement of the component, physically impedes the motion of a covered gate.</DELETED> <DELETED> (7) State.—The term “State” has the meaning given such term in section 3(a) of the Consumer Product Safety Act (15 U.S.C. 2052(a)).</DELETED>
SECTION 1. SHORT TITLE.
This Act may be cited as the “Alex Gate Safety Act of 2026”.
SEC. 2. CONSUMER PRODUCT SAFETY STANDARD FOR COVERED GATES.
(a) Standard Required.—Not later than 180 days after the date of enactment of this Act, the Consumer Product Safety Commission (referred to in this section as the “Commission”) shall promulgate, under section 553 of title 5, United States Code, the following provisions, as in effect on date of enactment of this Act, as final consumer product safety standards:
(1) ASTM F900-25 Standard Specification for Industrial and Commercial Swing Gates.
(2) ASTM F1184-23e1 Standard Specification for Industrial and Commercial Horizontal Slide Gates.
(3) ASTM F2200-24 Standard Specification for Automated Vehicular Gate Construction.
(b) CPSC Determination of Scope.—In adopting the standards under subsection (a), the Commission shall limit the application of such standards to consumer products as defined in section 3(a)(5) of the Consumer Product Safety Act (15 U.S.C. 2052(a)(5)).
(c) Revision of Voluntary Standards.--
(1) Notice to the commission.—If any of the standards specified in subsection (a) are revised following the date of enactment of this Act, the organization that revised the requirements of such standard, shall notify the Commission after the final approval of the revision.
(2) Treatment of revision.—A revised voluntary standard under paragraph (1) shall be considered to be a consumer product safety standard issued by the Commission under section 9 of the Consumer Product Safety Act (15 U.S.C. 2058), effective 180 days after the date on which the organization notifies the Commission of the revision (or such later date specified by the Commission in the Federal Register) unless, within 90 days after receiving the notice, the Commission notifies the organization that it has determined that the proposed revision, in whole or in part, does not improve the safety of the consumer product covered by the standard and that the Commission is retaining the existing consumer product safety standard.
(d) Treatment of Standards.—A standard promulgated under this section, including a revision of such standard adopted by the Commission, shall be treated as a consumer product safety rule promulgated under section 9 of the Consumer Product Safety Act (15 U.S.C. 2058).
SEC. 3. EDUCATION AND AWARENESS CAMPAIGN.
(a) In General.—Not later than 2 years after the date of enactment of this Act, the Commission shall undertake a national campaign to promote awareness and educate the public about the dangers associated with covered gates, including the dangers of detached or falling vehicular gates, and methods (including low-cost methods) for manufacturers to comply with the consumer product safety standards adopted under section 2.
(b) Report to Congress.—Not later than 3 years after the date of enactment of this Act, the Commission shall submit to Congress a report that contains a summary of actions taken by the Commission under subsection (a). Calendar No. 716
119th CONGRESS
2d Session
S. 1682
[Report No. 119-161]
_______________________________________________________________________
A BILL
To direct the Consumer Product Safety Commission to promulgate a consumer product safety standard for certain gates, and for other purposes.
_______________________________________________________________________
November 16, 2026
Reported with an amendment
Official text from the U.S. Government Publishing Office. Formatting has been adapted for reading on Ratifi.