Ratifi Español Sign in
Ratifi

Federal bills from Congress.gov. State bills from Open States.

S. 1682119th Congress

What changed between versions

55 paragraphs changed+1268 words added−640 removed

Highlighted text was added in the newer version. Struck-through text was removed.

[Congressional Bills 119th Congress] [From the U.S. Government Publishing Office] [S. 1682 IntroducedReported in Senate (ISRS)]

<DOC>

Calendar No. 716 119th CONGRESS 1st2d Session S. 1682

[Report No. 119-161]

To direct the Consumer Product Safety Commission to promulgate a consumer product safety standard for certain gates, and for other purposes.

3 unchanged paragraphs

_______________________________________________________________________

IN THE SENATE OF THE UNITED STATES

May 8, 2025

Mr. Curtis (for himself and Ms. Klobuchar) introduced the following bill; which was read twice and referred to the Committee on Commerce, Science, and Transportation

November 16, 2026

Reported by Mr. Cruz, with an amendment [Strike out all after the enacting clause and insert the part printed in italic]

_______________________________________________________________________

A BILL

To direct the Consumer Product Safety Commission to promulgate a consumer product safety standard for certain gates, and for other purposes.

Be it enacted by the Senate and House of Representatives of the United States of America in Congress assembled,

<DELETED>SECTION 1. SHORT TITLE.</DELETED>

<DELETED> This Act may be cited as the “Alex Gate Safety Act of 2025”.</DELETED>

<DELETED>SEC. 2. CONSUMER PRODUCT SAFETY STANDARD FOR COVERED GATES.</DELETED>

<DELETED> (a) Standard Required.—</DELETED> <DELETED> (1) In general.—Not later than 1 year after the date of the enactment of this Act, the Commission shall promulgate, in accordance with section 553 of title 5, United States Code, a final consumer product safety standard for covered gates that includes the requirements described in paragraph (2).</DELETED> <DELETED> (2) Requirements described.—The requirements described in this paragraph for a covered gate are the following:</DELETED> <DELETED> (A) The covered gate meets the safety- related standards of ASTM F900-25, ASTM F1184-23e1, or ASTM F2200-24, as applicable to the relevant category of covered gate as of January 1, 2025, or any successor standard.</DELETED> <DELETED> (B) If the covered gate has an operator or similar system, the gate meets the safety-related standards of ANSI/CAN/UL 325 as of January 1, 2025, or any successor standard.</DELETED> <DELETED> (b) CPSC Determination of Scope.—In promulgating a consumer product safety standard under subsection (a), the Commission shall determine the types of covered gates that are subject to the standard and ensure that such covered gates are within the jurisdiction of the Commission.</DELETED> <DELETED> (c) Revision of Voluntary Standards.—</DELETED> <DELETED> (1) Notice to the commission.—If an organization revises a voluntary standard that has been adopted, in whole or in part, as a consumer product safety standard under this section, the organization shall notify the Commission of the revision.</DELETED> <DELETED> (2) Treatment of revision.—The revised voluntary standard shall be considered to be adopted by the Commission, effective on the date that is 180 days after the date on which the organization notifies the Commission of the revision (or such later date specified by the Commission in the Federal Register) unless, not later than 90 days after the date on which the organization notifies the Commission of the revision, the Commission notifies the organization that the Commission has determined that the revision does not improve the safety of the covered gates to which the standard applies and that the Commission is retaining the existing consumer product safety standard. Not later than 90 days before the date on which a revised voluntary standard is considered to be adopted by the Commission under this subsection, the Commission shall publish in the Federal Register notice that such revised voluntary standard will be considered to be so adopted on such date.</DELETED> <DELETED> (d) Future Rulemaking.—At any time after the promulgation of a consumer product safety standard under subsection (a), the Commission may initiate a rulemaking, in accordance with section 553 of title 5, United States Code, to modify such standard, if the Commission determines that a modification would further reduce the risk of injury associated with covered gates.</DELETED> <DELETED> (e) Treatment of Standards.—Any consumer product safety standard promulgated under subsection (a) (including any modification of such standard under subsection (c)) or revised voluntary standard considered to be adopted by the Commission under subsection (c) shall be treated as a consumer product safety rule promulgated under section 9 of the Consumer Product Safety Act (15 U.S.C. 2058).</DELETED>

<DELETED>SEC. 3. EDUCATION AND AWARENESS CAMPAIGN.</DELETED>

<DELETED> (a) In General.—Not later than 2 years after the date of the enactment of this Act, the Commission shall undertake a national campaign to promote awareness and educate the public about the dangers associated with covered gates, including the dangers of detached or falling covered gates, and methods (including low-cost methods) to prevent covered gates from causing death or injury, including safety standards relating to covered gates and best practices for design, installation, inspection, maintenance, and improvement of covered gates.</DELETED> <DELETED> (b) Requirements.—In carrying out the campaign required by subsection (a), the Commission shall employ, at a minimum, the following:</DELETED> <DELETED> (1) Educational materials designed for covered gate manufacturers, contractors, retailers, and service companies.</DELETED> <DELETED> (2) Educational materials designed for consumers, owners, and operators of covered gates.</DELETED> <DELETED> (3) Educational materials designed for building officials and local educational agencies to support the updating and enforcement of building codes for new and existing buildings with respect to the safety of covered gates.</DELETED> <DELETED> (c) Report to Congress.—Not later than 3 years after the date of the enactment of this Act, the Commission shall submit to Congress a report that contains a summary of actions taken by the Commission in the campaign required by subsection (a).</DELETED>

<DELETED>SEC. 4. DEFINITIONS.</DELETED>

<DELETED> In this Act:</DELETED> <DELETED> (1) Building official.—The term “building official” means any State, Tribal, territorial, or local official who is responsible for proposing modifications to building codes, participating in adopting building codes, interpreting building code requirements, overseeing building code enforcement activities, or otherwise administering building codes.</DELETED> <DELETED> (2) Commission.—The term “Commission” means the Consumer Product Safety Commission.</DELETED> <DELETED> (3) Covered gate.—The term “covered gate” means—</DELETED> <DELETED> (A) an automatic vehicular gate;</DELETED> <DELETED> (B) a manual vehicular gate; and</DELETED> <DELETED> (C) any other gate that is more than 48 inches wide or 84 inches or greater in height.</DELETED> <DELETED> (4) Local educational agency.—The term “local educational agency” has the meaning given such term in section 8101 of the Elementary and Secondary Education Act of 1965 (20 U.S.C. 7801).</DELETED> <DELETED> (5) Manufacturer.—The term “manufacturer” has the meaning given such term in section 3(a) of the Consumer Product Safety Act (15 U.S.C. 2052(a)).</DELETED> <DELETED> (6) Positive stops.—The term “positive stops” means an immovable component that, by the placement of the component, physically impedes the motion of a covered gate.</DELETED> <DELETED> (7) State.—The term “State” has the meaning given such term in section 3(a) of the Consumer Product Safety Act (15 U.S.C. 2052(a)).</DELETED>

SECTION 1. SHORT TITLE.

This Act may be cited as the “Alex Gate Safety Act of 20252026”.

SEC. 2. CONSUMER PRODUCT SAFETY STANDARD FOR COVERED GATES.

(a) Standard Required.--

(1a) InStandard generalRequired.—Not later than 1180 yeardays after the date of the enactment of this Act, the Consumer Product Safety Commission (referred to in this section as the “Commission”) shall promulgate, in accordance withunder section 553 of title 5, United States Code, athe following provisions, as in effect on date of enactment of this Act, as final consumer product safety standard for covered gates that includes the requirements described in paragraph (2).standards:

(2) Requirements described.—The requirements described in this paragraph for a covered gate are the following:

(A) The covered gate meets the safety-related standards of ASTM F900-25, ASTM F1184-23e1, or ASTM F2200-24, as applicable to the relevant category of covered gate as of January 1, 2025, or any successor standard.

(B) If the covered gate has an operator or similar system, the gate meets the safety-related standards of ANSI/CAN/UL 325 as of January 1, 2025, or any successor standard.

(1) ASTM F900-25 Standard Specification for Industrial and Commercial Swing Gates.

(2) ASTM F1184-23e1 Standard Specification for Industrial and Commercial Horizontal Slide Gates.

(3) ASTM F2200-24 Standard Specification for Automated Vehicular Gate Construction.

(b) CPSC Determination of Scope.—In promulgatingadopting athe consumer product safety standardstandards under subsection (a), the Commission shall determinelimit the typesapplication of coveredsuch gates that are subjectstandards to theconsumer standardproducts andas ensuredefined thatin suchsection covered gates are within the jurisdiction3(a)(5) of the CommissionConsumer Product Safety Act (15 U.S.C. 2052(a)(5)).

(c) Revision of Voluntary Standards.--

(1) Notice to the commission.—If anany organizationof revisesthe astandards voluntary standard that has been adopted,specified in wholesubsection or(a) inare part,revised asfollowing athe consumerdate productof safetyenactment standard underof this sectionAct, the organization that revised the requirements of such standard, shall notify the Commission after the final approval of the revision.

(2) Treatment of revision.—TheA revised voluntary standard under paragraph (1) shall be considered to be adopteda consumer product safety standard issued by the Commission under section 9 of the Consumer Product Safety Act (15 U.S.C. 2058), effective on the date that is 180 days after the date on which the organization notifies the Commission of the revision (or such later date specified by the Commission in the Federal Register) unless, not later thanwithin 90 days after the date on whichreceiving the organization notifies the Commission of the revisionnotice, the Commission notifies the organization that the Commissionit has determined that the proposed revision, in whole or in part, does not improve the safety of the consumer product covered gates to whichby the standard applies and that the Commission is retaining the existing consumer product safety standard. Not later than 90 days before the date on which a revised voluntary standard is considered to be adopted by the Commission under this subsection, the Commission shall publish in the Federal Register notice that such revised voluntary standard will be considered to be so adopted on such date.

(d) Future Rulemaking.—At any time after the promulgation of a consumer product safety standard under subsection (a), the Commission may initiate a rulemaking, in accordance with section 553 of title 5, United States Code, to modify such standard, if the Commission determines that a modification would further reduce the risk of injury associated with covered gates.

(ed) Treatment of Standards.—Any consumer product safetyA standard promulgated under subsectionthis (a)section, (including anya modificationrevision of such standard under subsection (c)) or revised voluntary standard considered to be adopted by the Commission under subsection (c), shall be treated as a consumer product safety rule promulgated under section 9 of the Consumer Product Safety Act (15 U.S.C. 2058).

SEC. 3. EDUCATION AND AWARENESS CAMPAIGN.

(a) In General.—Not later than 2 years after the date of the enactment of this Act, the Commission shall undertake a national campaign to promote awareness and educate the public about the dangers associated with covered gates, including the dangers of detached or falling coveredvehicular gates, and methods (including low-cost methods) for manufacturers to preventcomply coveredwith gatesthe fromconsumer causing death or injury, includingproduct safety standards relatingadopted tounder coveredsection gates and best practices for design, installation, inspection, maintenance, and improvement of covered gates2.

(b) Requirements.—In carrying out the campaign required by subsection (a), the Commission shall employ, at a minimum, the following:

(1) Educational materials designed for covered gate manufacturers, contractors, retailers, and service companies.

(2) Educational materials designed for consumers, owners, and operators of covered gates.

(3) Educational materials designed for building officials and local educational agencies to support the updating and enforcement of building codes for new and existing buildings with respect to the safety of covered gates.

(cb) Report to Congress.—Not later than 3 years after the date of the enactment of this Act, the Commission shall submit to Congress a report that contains a summary of actions taken by the Commission in the campaign required byunder subsection (a). Calendar No. 716

SEC. 4. DEFINITIONS.

In this Act:

(1) Building official.—The term “building official” means any State, Tribal, territorial, or local official who is responsible for proposing modifications to building codes, participating in adopting building codes, interpreting building code requirements, overseeing building code enforcement activities, or otherwise administering building codes.

(2) Commission.—The term “Commission” means the Consumer Product Safety Commission.

(3) Covered gate.—The term “covered gate” means--

(A) an automatic vehicular gate;

(B) a manual vehicular gate; and

(C) any other gate that is more than 48 inches wide or 84 inches or greater in height.

(4) Local educational agency.—The term “local educational agency” has the meaning given such term in section 8101 of the Elementary and Secondary Education Act of 1965 (20 U.S.C. 7801).

(5) Manufacturer.—The term “manufacturer” has the meaning given such term in section 3(a) of the Consumer Product Safety Act (15 U.S.C. 2052(a)).

(6) Positive stops.—The term “positive stops” means an immovable component that, by the placement of the component, physically impedes the motion of a covered gate.

(7) State.—The term “State” has the meaning given such term in section 3(a) of the Consumer Product Safety Act (15 U.S.C. 2052(a)).

119th CONGRESS

2d Session

S. 1682

[Report No. 119-161]

_______________________________________________________________________

A BILL

To direct the Consumer Product Safety Commission to promulgate a consumer product safety standard for certain gates, and for other purposes.

_______________________________________________________________________

November 16, 2026

Reported with an amendment

Back to the full text