Ratifi Español Sign in
Ratifi

Federal bills from Congress.gov. State bills from Open States.

S 8833Session 2025-2026

Relates to certain off-site custom fabrication public works projects and the payment of prevailing wage

S8833

Underlined text would be added to current law. Struck-through text would be removed.

Skip to main content

New York State Assembly

Speaker Carl E. Heastie

  • Assembly Members
  • Legislative Info
  • Public Hearings
  • Speaker's Press
  • Assembly Reports
  • Committees & More
  • Bill Search Home
  • Laws
  • Legislative Calendar
  • Public Hearing Schedule
  • Assembly Calendars
  • Assembly Committee Agenda
Javascript must be enabled to properly view this page. Bill No.:  
     
  •  Summary 
  •  
  •  Actions 
  •  
  •  Committee&nbspVotes 
  •  
  •  Floor&nbspVotes 
  •  
  •  Memo 
  •  
  •  Text 
  •  
  •  LFIN 
  •  
  •  Chamber&nbspVideo/Transcript 

S08833 Summary:

BILL NOS08833
 
SAME ASSAME AS A09464
 
SPONSORJACKSON
 
COSPNSR
 
MLTSPNSR
 
Amd ?220, Lab L (as proposed in S.2536-A & A.2747-A)
 
Clarifies the definition of custom fabrication for the purposes of prevailing wage; requires certain reports for public works contracts including such custom fabrication.
Go to top

S08833 Text:

STATE OF NEW YORK ________________________________________________________________________ 8833 IN SENATE January 8, 2026 ___________ Introduced by Sen. JACKSON -- read twice and ordered printed, and when printed to be committed to the Committee on Rules AN ACT to amend the labor law, in relation to certain off-site custom fabrication public works projects and the payment of prevailing wage The People of the State of New York, represented in Senate and Assem- bly, do enact as follows: 1 Section 1. Paragraph (f) of subdivision 3 of section 220 of the labor 2 law, as added by a chapter of the laws of 2025 amending the labor law 3 relating to inclusion of certain off-site custom fabrication as public 4 work for the purposes of payment of prevailing wage, as proposed in 5 legislative bills numbers S. 2536-A and A. 2747-A, is amended to read as 6 follows: 7 (f) (i) For the purposes of this subdivision contractors or subcon- 8 tractors engaged in custom fabrication shall not be regarded as material 9 suppliers. For the purposes of this subdivision, a legal day's work for 10 which the prevailing rate of wages for the New York county in which the 11 public works project is situated shall be paid to laborers, workers and 12 mechanics shall include custom fabrication regardless of whether the 13 custom fabrication occurs on-site, off-site, or in another jurisdiction 14 [outside the state where the custom fabrication constitutes a signif- 15 icant portion of the building or work, it] and such pay shall be a 16 condition of the contract concerning all such custom fabrication work 17 [that] involving the contractor or employer awarded the public work 18 contract, except where the project includes federal funding that trig- 19 gers federal rules for wage requirements, and any subcontractor thereto 20 shall pay the on-site prevailing wage required for workers at the site 21 of the public work project to those workers performing the custom fabri- 22 cation. 23 (ii) To perform a public works contract each contractor or subcontrac- 24 tor who employs workers [off-site] for [the] custom fabrication work 25 related to a public work project shall maintain certified payrolls [for 26 those workers and provide such payrolls, with original certifications, 27 to the department at least annually and upon request,] and shall comply EXPLANATION--Matter in italics (underscored) is new; matter in brackets [ ] is old law to be omitted. LBD00331-04-6 S. 8833 2 1 with [section] sections two hundred twenty-i and two hundred twenty-j of 2 this article[, as applicable]. 3 (iii) For the purposes of this subdivision the term "custom fabri- 4 cation" shall include[, but not be limited to,] the fabrication of exte- 5 rior or interior wall panel systems, woodwork, electrical, plumbing, 6 heating, cooling, ventilation or exhaust duct systems, rebar cages, and 7 mechanical insulation solely and specifically designed and engineered 8 for [installation in the construction, repair or renovation of a build- 9 ing which is the subject of a contract to which the state, a department 10 of the state, a board or officer in the state, a municipal corporation, 11 a public benefit corporation or a commission appointed pursuant to law 12 is a party. For the purposes of this subdivision, a "significant 13 portion of building or work" means that portions or modules of the 14 building or work, as opposed to smaller prefabricated components, are 15 delivered to the place where the building or work will remain, with 16 minimal construction work remaining other than the installation and/or 17 assembly of the portions or modules] a specified public work project. 18 The term "custom fabrication" does not include components, portions, 19 modules, or materials that are otherwise stocked or readily available 20 absent a specified public work project. 21 [(ii)] (iv) The provisions of this paragraph shall not include any 22 highway, structure, vehicle or watercraft used to support transporting 23 persons; the foregoing notwithstanding, this paragraph shall include 24 electrical, plumbing, heating, cooling, ventilation or mechanical insu- 25 lation work in rest areas, transit stations or depots. 26 (v) Nothing in this paragraph shall be construed to apply the require- 27 ments set forth in section two hundred twenty-four-a of this article to 28 any custom fabrication associated with the creation or rehabilitation of 29 any residential dwelling units or manufactured home parks that are 30 exempted from the definition of "covered projects" as set forth in 31 section two hundred twenty four-a of this article. 32 (vi) The contractor awarded a public work contract, or a subcontractor 33 thereto, shall be required to report to the department of jurisdiction 34 the intent to utilize custom fabrication in a form and manner prescribed 35 by the fiscal officer. Such reports shall identify the public work 36 contract, the name and location of the custom fabrication entity, and 37 description of the custom fabrication work. The contractor awarded a 38 public work contract, or subcontractor thereto, shall notify any addi- 39 tional party contracted with for custom fabrication that the contract is 40 subject to this subdivision. The department of jurisdiction, as defined 41 in subdivision three-a of this section and including any entity to whom 42 such department of jurisdiction delegates their authority, shall be 43 required to report to the fiscal officer the intention to contract for 44 custom[, off-site] fabrication [of any materials on all contracts, 45 regardless of the amount, which may include the employment of laborers, 46 workers or mechanics in the application to the fiscal officer for the 47 approval of such contract. The department of jurisdiction's report shall 48 state the name and address of the off-site, custom fabricator, identify 49 the custom materials that are being fabricated off-site and the quantity 50 thereof, the estimated and actual cost of the off-site fabrication, and 51 the estimated number of workers employed to complete the custom fabri- 52 cation at the off-site location] in a form and manner prescribed by the 53 fiscal officer. Such reports shall identify the public work contract, 54 the name and location of the custom fabrication entity, and description 55 of the custom fabrication work. Reports submitted to the fiscal officer S. 8833 3 1 shall be subject to disclosure pursuant to article six of the public 2 officers law. 3 § 2. Severability. If any clause, sentence, paragraph, subdivision, 4 section, or part of this act shall be adjudged by any court of competent 5 jurisdiction to be invalid, such judgment shall not affect, impair, or 6 invalidate the remainder thereof, but shall be confined in its operation 7 to the clause, sentence, paragraph, subdivision, section, or part there- 8 of directly involved in the controversy in which such judgment shall 9 have been rendered. 10 § 3. This act shall take effect on the same date and in the same 11 manner as a chapter of the laws of 2025 amending the labor law relating 12 to inclusion of certain off-site custom fabrication as public work for 13 the purposes of payment of prevailing wage, as proposed in legislative 14 bills numbers S. 2536-A and A. 2747-A, takes effect. Go to top <link href="/styles/noscript_styles.css" rel="stylesheet"/> Sitemap Request Information Directions and Maps

Official text from the New York Legislature. Formatting has been adapted for reading on Ratifi.