Ratifi Español Sign in
Ratifi

Federal bills from Congress.gov. State bills from Open States.

A 4801Session 222

What changed between versions

49 paragraphs changed+791 words added−612 removed

Highlighted text was added in the newer version. Struck-through text was removed.

ASSEMBLY TELECOMMUNICATIONS AND UTILITIES COMMITTEE

STATEMENT TO

[First Reprint]

ASSEMBLY, No. 4801

with committee amendments

STATE OF NEW JERSEY

222nd LEGISLATURE

DATED:INTRODUCED JUNEMARCH 423, 2026

The Assembly Telecommunications and Utilities Committee reports favorably and with committee amendments Assembly Bill No. 4801.

As amended and reported, this bill prohibits certain costs and obligations related to large-load addition customers from being passed through to non-large load addition customers.

Under the bill, when issued a curtailment obligation or directive from PJM Interconnection, L.L.C. (PJM) due to a load-serving entity’s or an electric public utility’s provision of service to a large-load addition customer, the load-serving entity or electric public utility is required to impose PJM’s curtailment obligation or directive solely on the corresponding large-load addition customers. However, the bill does not prevent a load-serving entity or an electric public utility from taking necessary action to maintain system reliability and adopting voluntary load curtailment programs.

In addition, the bill requires any financial or other obligation associated with a reliability procurement, or other comparable assignment of long-term capacity obligations, that is assigned to a load-serving entity or an electric public utility to be passed through or allocated to large-load addition customers under substantially-similar terms as PJM assigns the financial or other obligations to the load-serving entity or electric public utility.

Finally, under the bill, in order to receive electric public utility service in the State, a large-load addition customer is required to: (1) provide appropriate financial security to the load-serving entity, PJM, the electric public utility, or other entity, as appropriate, to ensure that costs associated with a reliability procurement are not passed through to other New Jersey customers, even if the large-load addition customer’s demand on the electrical grid does not fully materialize over the term of the reliability procurement commitment; and (2) submit detailed information to PJM as outlined in the bill.

COMMITTEE AMENDMENTS:

The committee amended the bill to:

(1) define “large-load addition customer” to mean an individual addition of load at or above 50 megawatts (MW) or the MW threshold set by the board rather than individual additions of load at or above 50 MW at a single point of interconnection;

(2) define “load-serving entity” to include a large-load addition customer that serves as their own load serving entity;

(3) change the defined term “reliability backstop procurement” to “reliability procurement” and revise the definition;

(4) require electric public utilities to impose PJM curtailment obligations and directives on large-load addition customers;

(5) provide that any financial or other obligation associated with a reliability procurement or other comparable assignment of long-term capacity obligations that is assigned to a load-serving entity or an electric public utility are to be passed through or allocated to large-load addition customers. As introduced, such financial or other obligations that were assigned to a load serving entity were to be passed through to large load addition customers;

(6) require, as a condition of electric service, each large-load addition customer to provide an appropriate financial security to ensure that costs associated with a reliability procurement are not passed through to other New Jersey customers, even if the large-load addition customer’s demand on the electrical grid does not fully materialize over the term of the reliability procurement commitment;

(7) require the financial security specified under the bill to be paid, as appropriate, to PJM or another entity in addition to a load-serving entity or an electric public utility;

(8) require the board to adopt rules and regulations to determine an alternative MW threshold set for large-load addition customers; and

(9) make technical changes.

Sponsored by:

Assemblyman DAVID BAILEY, JR.

District 3 (Cumberland, Gloucester and Salem)

Assemblywoman ANDREA KATZ

District 8 (Atlantic and Burlington)

Assemblyman WAYNE P. DEANGELO

District 14 (Mercer and Middlesex)

Co-Sponsored by:

Assemblymen Kearney, Bhalla, Assemblywoman Swain and Assemblyman Tully

SYNOPSIS

Establishes certain protections against demand by large-load addition customers in State.

CURRENT VERSION OF TEXT

As reported by the Assembly Telecommunications and Utilities Committee on June 4, 2026, with amendments.

An Act establishing certain protections against demand by large-load addition customers in the State and supplementing Title 48 of the Revised Statutes.

Be It Enacted by the Senate and General Assembly of the State of New Jersey:

1. As used in P.L. , c. (C. ) (pending before the Legislature as this bill):

“Board” means the New Jersey Board of Public Utilities or a successor agency.

“Electric public utility” means the same as that term is defined in section 3 of P.L.1999, c.23 (C.48:3-51).

“Large-load addition customer” means 1 an 1 individual 1 [ additions ] addition 1 of load at or above 50 MW 1 [ at a single point of interconnection ] or an alternative MW threshold set by the board pursuant to section 5 of P.L. , c. (C. ) (pending before the Legislature as this bill) 1 .

“Load-serving entity” means an entity, or the duly-designated agent of the entity, including a load aggregator or power marketer, that serves end-users within the State and is authorized to sell electric energy to end-users located within the State. 1 “Load-serving entity” includes a large-load addition customer serving as the large-load addition customer’s own load-serving entity. 1

“PJM Interconnection, L.L.C.” or “PJM” means the same as that term is defined in section 3 of P.L.1999, c.23 (C.48:3-51).

“Reliability 1 [ backstop ] 1 procurement” means a PJM-approved mechanism to procure long-term 1 [ contracts ] commitments 1 from new capacity resources, however constituted, 1 that are 1 deemed necessary to ensure electric system reliability 1 [ during periods when market-based outcomes are insufficient to meet forecasted needs ] 1 .

2. When issued a curtailment obligation or directive from PJM due to a load-serving entity’s 1 or an electric public utility’s 1 provision of service to a large-load addition customer, the load-serving entity 1 or electric public utility 1 shall impose PJM’s curtailment obligation or directive solely on the load-serving entity’s 1 or electric public utility’s 1 large-load addition customers 1 , as appropriate 1 . However, nothing in this section shall be construed to prevent a load-serving entity 1 or an electric public utility 1 from taking necessary action to maintain system reliability and adopting voluntary load curtailment programs.

3. Any financial or other obligation associated with 1 [ the ] a 1 reliability 1 [ backstop ] 1 procurement, or other comparable assignment of long-term capacity obligations, that is assigned to a load-serving entity 1 or an electric public utility 1 shall be passed through 1 or allocated 1 to large-load addition customers under substantially-similar terms as PJM assigns the financial or other obligations to the load-serving entity 1 or electric public utility 1 .

4. In order to receive electric public utility service from an electric public utility in the State, a large-load addition customer shall: provide appropriate financial security 1 , 1 in a manner approved by the board, to 1 [ either ] 1 the load serving entity 1 [ or ] , PJM, 1 the electric public utility, 1 or other entity, 1 as appropriate, to ensure that costs associated with 1 a 1 reliability 1 [ backstop ] 1 procurement are not passed through to other New Jersey customers, 1 even 1 if the large-load addition customer’s demand on the electrical grid 1 [ necessitates reliability backstop procurement through PJM ] does not fully materialize over the term of the reliability procurement commitment 1 ; and submit detailed information to PJM, including, but not limited to, expected load usage, peak load, utilization, dependency on other proposed projects, and any other information requested by PJM.

5. The board shall, in accordance with the “Administrative Procedure Act,” P.L.1968, c.410 (C.52:14B-1 et seq.), adopt rules and regulations as necessary to implement the provisions of 1 [ this act ] P.L. , c. (C. ) (pending before the Legislature as this bill) 1 , including 1 rules and regulations determining an alternative MW threshold for large-load addition customers and 1 the form of the appropriate financial security pursuant to section 4 of P.L. , c. (C. ) (pending before the Legislature as this bill).

6. This act shall take effect immediately.

Back to the full text